Compliance with RoHS10 EU Directive 2011/65/EU & (EU)2015/863 Delivers up to 10A output current High efficiency: typ.92% at 24Vin~48Vin, full load Low output ripple and noise Exceptional thermal performance Industry standard "eighth-brick" footprint High reliability Remote On/Off negative logic Fixed switching frequency (330 KHz typical) Input under voltage lockout Output over voltage protection Output over current protection Over temperature protection Short circuit protection Meets IEC60950-1&IEC/UL/EN62368-1
LDFE120-48S12WCPSA series power module is an eighth -brick DC/DC converter that provides a high efficiency single output. It can operate from 18Vdc to 75Vdc input and 12V/10A output. The remote control option is negative logic. The converter turns off when the REM pin is at logic high and turns on when it at logic low, both are referenced to -Vin. The converter is off when the REM pin is left open. The output voltage trim logic is positive. The output voltage will increase when the TRIM pin is connected to “+S” and decrease when connected to “-S”.